| Shaft Name | Flex | Length (in) | Weight (g) | Tip O.D. (in) | Tip Length (in) | Butt O.D. (in) | Torque (degrees) | Kick Pt. |
|---|---|---|---|---|---|---|---|---|
| XM 50 | R | 46.0 | 52 | 0.335 | 3.0 | 0.606 | 5.1 | MID |
| XM 50 | S | 46.0 | 55 | 0.335 | 3.0 | 0.610 | 4.9 | MID |
| XM 50 | X | 46.0 | 58 | 0.335 | 3.0 | 0.614 | 4.9 | MID |
| XM 60 | R | 46.0 | 62 | 0.335 | 3.0 | 0.606 | 3.8 | MID |
| XM 60 | S | 46.0 | 63 | 0.335 | 3.0 | 0.610 | 3.7 | MID |
| XM 60 | X | 46.0 | 66 | 0.335 | 3.0 | 0.614 | 3.6 | MID |
| XM 60 | TX | 46.0 | 67 | 0.335 | 3.0 | 0.616 | 3.4 | MID |
| XM 70 | S | 46.0 | 72 | 0.335 | 3.0 | 0.608 | 3.2 | MID |
| XM 70 | X | 46.0 | 75 | 0.335 | 3.0 | 0.612 | 3.1 | MID |
| XM 70 | TX | 46.0 | 76 | 0.335 | 3.0 | 0.614 | 2.9 | MID |
| XM 80 | S | 46.0 | 81 | 0.335 | 3.0 | 0.608 | 2.9 | MID |
| XM 80 | X | 46.0 | 84 | 0.335 | 3.0 | 0.612 | 2.9 | MID |
| XM 80 | TX | 46.0 | 85 | 0.335 | 3.0 | 0.614 | 2.8 | MID |
MCA Kuro Kage XM profile features the same two key technologies found in the XT Series: Low Resin Content (L.R.C.) Prepreg and Titanium Nickel (TiNi) Wire. Featuring a softer mid-section to promote increased launch, the addition of TiNi wire in the tip-section to the MCA Kuro Kage XM series provides maximum stability through impact for this profile delivering a potent combination of power and control in this higher launching product.